Release Agent for Green Sand
The release agent for green sand is an auxiliary material designed based on the process characteristics of green sand, namely "containing moisture, clay-based bonding, and low-temperature application". When applied to the mold surface, it forms a stable isolation layer between the wet sand mold and the mold, solving the adhesion problem of green sand that easily occurs due to moisture adsorption. It is a key additive for ensuring the casting efficiency of green sand and the quality of castings.
- Information
Release Agent for Green Sand
Features:
Under normal conditions, used once, it can keep effective for several molding;
Significantly reduces release resistance, improves the quality of the casting surface;
Under bad molding condition, excellent release performance;
No fire hazard, high safety level.
| Model | Appearance | Specific Gravity （g/cm3） | Viscosity（20℃）cSt | Ignition Point ℃ | Pour Point ℃ |
| TMC-05 | White Emulsion | 0.9-1.0 | 3-7 | - | 0 |
| TMC-08 | White Emulsion | 0.80-0.86 | 4-8 | - | -10 |
| TMC-08A | White Emulsion | 0.86-0.92 | 6-10 | - | -5 |
Application guide:
1. Used without dilution;
2.Clean the mould surface by compressed air in advance;
3. Used spray gun or brush to apply evenly, then fill sand without drying;
Precautions:
1 .Spray every time by first-time using until the mould is glossy with an even film thickness, then sprayevery 1 to 2 moulds.
2. Regarding heating plate, gradually reduce the heating temperature according to the actual situation;3. Belong to general industrial agent, please follow the precautions accordingly.
4. lf skin or eye contact, wash with plenty of water immediately.
Shelf life:
Six months.
Packaging:
Packed in 20L or 200L plastic drum.