NEWS

Xinda's New Self-Hardening Furan Resin: Low Aldehyde, Low Carbon, Suitable for Cold Regions and Intelligent Casting

2026-11-16 09:08

Against the backdrop of the green transformation of the foundry industry and rising demand for high-end castings, self-hardening furan resins have long been plagued by pain points such as slow hardening at low temperatures, strict emission control requirements, uneven hardening of heavy-section castings, and sulfur penetration cracking of cast steel. In recent years, Xinda has continuously devoted itself to the research and development of resin materials and supporting processes. Its self-hardening furan resin for foundry has realized a transformation in development philosophy, shifting from the previous sole pursuit of strength indicators to a new-generation material system centered on environmental compliance, scenario adaptability and cost optimization.


Relying on low-aldehyde formulations and bio-based raw material modification routes, the product effectively breaks through emission bottlenecks. Through the development of a low-temperature fast-curing system, production restrictions in winter and cold regions are lifted. With composite modification technology using epoxy, cardanol and lignin, both high toughness of the resin and optimized usage cost are achieved simultaneously. Meanwhile, Xinda carries out collaborative development of the resin material with 3D printed sand molds, carbon-carbon composite materials and intelligent casting equipment, building a full-chain innovation ecosystem covering materials, processes, equipment and recycling of used sand. It provides integrated molding solutions for enterprises producing gray iron, ductile iron, high-grade cast steel and alloy cast iron.


Core Advantages of Low-Temperature Fast-Curing Furan Resin

The newly launched low-temperature fast-curing furan resin is a representative achievement of Xinda’s full-chain innovation system. It is custom-developed for challenging scenarios including winter startup of foundries, high-humidity environments, heavy-section castings and high-grade cast steel parts. All process indicators have been verified through mass production.


  • Stable Low-Temperature Curing, Enabling Continuous Winter Production in Cold Regions

    Equipped with Xinda’s intelligent hardener proportioning technology, the product adapts to a wide range of temperature and humidity conditions. It cures steadily at a sand temperature of 5℃–15℃ and a relative humidity of 30%–95%. At a low temperature around 0℃, the sand mold meets demolding requirements within 6 hours and completes full hardening within 24 hours. It effectively solves industry problems such as delayed pattern removal, insufficient strength development and disrupted production schedules in northern cold regions and low-temperature winter workshops, ensuring uninterrupted production throughout the year.

  • Improved Strength to Directly Reduce Resin Addition Cost

    At the conventional resin addition rate of 0.8%–1.0%, the 24-hour final strength of the resin increases by more than 10% compared with traditional similar products. If the original casting strength standard is maintained, the resin dosage can be reduced by 5%–10%. Under large-scale continuous molding conditions, the consumption of main materials is cut down, helping enterprises control the overall cost of molding materials without sacrificing casting quality.

  • Shortened Pattern Removal Cycle with Controllable and Uniform Deep Hardening

    The pattern removal efficiency fits different tooling: sand molds with wooden patterns can be stripped in 2–3 hours, and those with metal patterns in 5–6 hours, accelerating sand mold turnover and raising workshop molding efficiency. The deep hardening performance of heavy-section sand molds is greatly improved. The hardness difference between the surface and the center of thick sand molds is controlled within 5%, which effectively prevents defects such as sand mold deformation, core breakage and out-of-tolerance dimensions caused by “hard outside but soft inside”, and is especially suitable for the production of large-section and complex castings.

  • Low VOC and Low Free Aldehyde to Improve the Workshop Working Environment

    Adopting a bio-based high-activity matrix and low free-aldehyde formulation, the product reduces formaldehyde emission by more than 30% during molding and pouring, with VOC emissions stably below 50 ppm. It meets the increasingly strict domestic and overseas standards for workshop environmental protection and occupational health, supports the green production upgrade of foundry enterprises and eases environmental compliance pressure.

  • Supporting Intelligent Curing System for Controllable Processes in Mass Production

    The resin can be used in conjunction with Xinda’s intelligent hardener proportioning instrument. Within a wide sand temperature range of 5–40℃, the acidity control accuracy reaches ±1%. The system can automatically fine-tune the curing reaction rate according to the sand temperature, eliminating hardening differences caused by day-night temperature variations and batch fluctuations. It ensures consistent curing rhythm of sand molds and strong process repeatability during multi-shift and mass production.

  • Expanded Application Scope, Compatible with High-Grade Cast Steel and 3D Printed Sand Molds

    In addition to mature applications in gray iron and ductile iron castings, this resin series has been successfully applied to high-grade cast steel, alloy cast iron and 3D printed sand molds. For sulfur-sensitive cast steel parts, the sulfur penetration on the casting surface caused by this resin is only one-third of that of traditional furan resins, greatly reducing hot cracks and surface defects and satisfying the quality requirements of high-end components such as wind power parts, construction machinery and hydraulic castings.


Breakthroughs in a single material are only the starting point. In the future, Xinda will continue to iterate its products according to climatic conditions in different regions, customer casting categories and environmental standards, and launch supporting binder and hardener solutions for segmented scenarios. We help foundry enterprises balance quality, efficiency, cost and environmental protection, and jointly promote the high-quality upgrading of the industry.

Get the latest price? We'll respond as soon as possible(within 12 hours)
This field is required
This field is required
Required and valid email address
This field is required
This field is required